Description
The Iridium Pack is the first pack developed by Kinogear. Completely modular, it can be used as a shoulder bag in an urban context or transformed into a chest rig for more intense uses.
Features
The pack is made of 500D Cordura with a YKK 8C zipper around the entire perimeter, allowing full opening and easy access to the contents. A cord with plastic cord lock allows you to adjust the degree of opening. Excess paracord can be stored in the internal pocket.
The pack is supplied with a shoulder strap, with two plastic buckles for regulation and attached to the bag by two webbing toggles. Two elastic webbing keepers hold the excess strapage.
Additional straps for use as a hip pack or chest rig must be ordered separately on the product page of Pack straps
On the front, exterior front pocket with YKK 8C closure and two sliders with silent cords
Two MOLLE rows for adding additional pouches or attaching elements to the front
150 x 75 mm velcro area for patches or identification
Below, 4 MOLLE rows and 2 webbing loops for attaching pouches or compatible MOLLE accessories. Can also be used to attach carabiners or braid elastic rope for more attachment options.
On the inside front, 100mm Velcro strip for adding Velcro inserts and attach things
At the bottom, 4 25mm loops for adding separators or as anchor points.
On the inside back, pocket with YKK 5C closure and autolock slider with cord pull.
25mm and 50mm elastic webbing strips with secure pocket bottom to organize and store tools and personal effects. The secure pocket bottom allows optimal retention even if the objects are too small for the elastics.
Paracord with cord lock to set how much the pack should open, it is removable and replaceable.
At the rear, 3 MOLLE rows for attaching accessories or the pack to a compatible MOLLE surface, such as a belt.
The seams are doubled and reinforced at the stress points. The interior seams are covered with bias tape for optimal endurance.
On the edges, 6 square rings compatible with 25mm straps and our webbing toggle attachment system.
This way, the pack can be quickly configured as a shoulder bag, hip bag or chest rig with hip strap.
The webbing toggle attachment system is extremely tough, quick to install and allows a reduced footprint on the bag.
Size information
Size: 24 x 19 x 8cms – Weight Pack only: 260g – Pack with strap: 335g
Origin / Information on materials
More information on the materials used and their origins on the dedicated page: Provenance of the materials
Instructions
To install the strap:
– Hold the square ring between your fingers and present the webbing toggle laid flat.
– Start inserting it into the square ring
– Pull on the other side to pass the toggle completely through the ring
– Check that the edge of the toggle rests on top of the side of the ring
To remove the strap:
– Hold the square ring and press the webbing toggle to insert the rim into the opening of the ring
– Check that the toggle stays flat and doesn't bunch up on the ring. Pull the toggle through the ring to detach it
Inventory and customization
More information on our inventory management in our F.A.Q.
Customization
Do you have specific needs or want a modified version of this product? Do not hesitate to contact us through our contact form or through social networks. We adapt easily and can personalize each request.
Avis
There are no reviews yet.